Description
The A 1532 EVSE XA adapter is suitable for electrical safety and functional testing of EVSEs together with the supported METREL system test equipment.
It is designed for testing Mode 3 EV supply equipment with a Type 2 plug. The XA version supports three-phase load tests up to 13 A and various fault types, including ''PE open''. Using the Metrel AUTOSEQUENCES, which are predefined in the newer multifunction testers, the complete EVSE charging station can be tested (step by step) both electrically and functionally at the push of a button. With MESM, a professional station-based report can be generated.
Features:
- Banana socket outputs for connection to a three-phase system tester
- Voltage indicator on EVSE output
- Proximity pilot resistor selector switch for simulating the presence of EV cables as well as detecting the rated current
- Selector switch for the Control Pilot resistor to simulate the state of an electric vehicle
- Socket output for connection to a single-phase system tester (phase 1, neutral, PE)
- Type 2 connector for EVSE connection
- 6 mA EV RCD support
- Support for functional tests (only together with MI 3155 XD and MI 3152 EU)
- Support for EVSE AUTO SEQUENCE (only together with MI 3155 XD and MI 3152 EU)
- Creation of MESM reports (The reports can only be printed via the MESM-PC-SW. The MESM licence is included e.g. with the MI 3152 EU multifunction tester
- Load tests with up to 13 A on socket , single-phase or on banana sockets, three-phase
- Fault simulation of diode short circuit, PE-CP short circuit and PE open
- BNC output connector for CP signal monitoring
Application:- On-site test of EVSE charging station installation
- Initial and regular follow-up testing of private, semi-private and public EVSE charging stations
Safety: EN 61010-1
Functionality: EN 61851-1
Scope of delivery: EVSE instrument adapter XA, small transport bag, operating instructions
