Description
Fingerprint code lock BioAccess PRO
The BioAccess PRO fingerprint code lock allows easy access via the biometric access feature ''fingerprint'' as well as via RFID transponder and numeric code. Multiple access methods can be combined for increased access security. The weatherproof and vandal-resistant device can manage up to 1000 access points. A 26/44-bit Wiegand interface enables particularly secure data transmission/control via external Wiegand controller. The device can interact with Wiegand controllers, operate itself as a Wiegand controller or as a stand-alone device.
- Robust, weatherproof (IP66) and vandal-resistant fingerprint code lock
- Capacitive fingerprint sensor, touch keypad
- EM RFID access (125 kHz) and Mifare RFID access (13.56 MHz)
- Digit code access with 4 to 6 digits, input field backlit, with automatic switch-off after 20 s
- For up to 1000 accesses (100 fingerprints + 888 RFIDs/PINs+ 2 panic codes + 10 visitors)
- One programmable relay switching output, potential-free
- 26/44 bit Wiegand interface, Mifare: 56/58 bit input/output
- Access data management in Wiegand controller
- Stand-alone operation or interlock operation for 2 doors possible
- Latch mode (latching operation for door hold-open) available
- Door contact monitoring
- Door opener button input (Exit-Button) for the
- door opener control from inside
- Fail-safe lock or fail-safe lock operation
- Access via fingerprint, RFID, numeric code or combined possible
- Tamper sensor against disassembly/manipulation
- Multicolor status display
- Internal signal generator and external signal output
Note: When using the 4-bit pin output format in conjunction with a Wiegand interface, all three input versions can be used (numeric code, RFID and fingerprint together or in any combination). When switching to the 10-bit pin output format, the fingerprint version must not be used, as this could lead to a security gap.
