Description
Socket tester with finger contact for active PE error detection and for testing the tripping function of a 30-mA FI/RCD circuit breaker
Quick and easy testing of earthed contact sockets, cable reels and extension cables for correct connection. Wiring errors and inadmissibly high contact voltages at the PE connection are indicated immediately. It is also possible to test the tripping function of a 30-mA FI/RCD circuit breaker by pressing the FI/RCD button.
Test functions:
- Indication of correct wiring via LEDs
- Wiring errors such as missing PE, N and L conductors as well as the
- inversion of the L and PE conductors are clearly indicated via three LEDs
- An active PE test by means of a contact electrode and via the LC display warns of a dangerous contact voltage (> 50 V) being applied to the PE connection
- FI/RCD test key for testing the tripping function of 30-mA RCDs
Features:- Safe and easy operation by trained personnel (EUP technicians)
- Clear status table provides information on the correct connection (OK, green) and the nature of the fault (red) of the earthed contact socket
Technical data:Display: optically via three red signal LEDs for N, PE, L conductor and LC display
Voltage range: 230 V AC, ±10%
Frequency range: 50 Hz - 60 Hz
PE test response threshold: UB < 50 V AC to earth
FI/RCD test current: approx. 30 mA
Power supply: via the test object (no batteries required)
Measurement category: CAT II 300 V
Safety: DIN EN 61010-1, DIN EN 61010-2-033
Dimensions: 80 x 72 x 78 mm (L x W x H)
