Description
This S-code type M12 connector is suitable for AC power supply. Designed with 4 pins, i.e. 3+PE contacts with a rated current of 12 A at 630V AC, it is intended for the M12 connections used with our 220V LED luminaires. The M12 connector in the straight socket version is plugged into the M12 connection of the luminaire and fixed via the metal wheel. The coding prevents incorrect plugging.
Configuration: The connector is mounted on a cable with a diameter of 8 to 10 mm for power supply with cable cross-sections of up to 1.5 mm². Inside the cable socket, the wires are fastened by means of screw terminals, AWG 18, and the cable is secured by a cable gland.
Safety note
The connector is intended for use on an LED2WORK luminaire with M12 connection, S-code type.
This connector must not be plugged or unplugged under load. Failure to comply and improper use may result in personal injury.
Connectors may only be installed by persons with electrical engineering training and in compliance with the applicable regulations.
The user must take appropriate safety precautions to ensure that the connector cannot be accidentally disconnected.
Connectors with protection class IP 67 are not designed for use under water.
