Cmod A7: Breadboardable Artix-7 FPGA Module
Product Description
The Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad-SPI Flash, and basic I/O devices. These components make it a formidable, albeit compact, platform for digital logic circuits and MicroBlaze embedded soft-core processor designs using Xilinx's development software, Vivado. There are 44 Digital FPGA I/O signals and two FPGA Analog inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate your programmable logic design directly into a solderless breadboard circuit. At just 0.7” by 2.75”, it can also be loaded in a standard socket and used in embedded systems.
FPGA-Features:
• Cmod A7-35T
• FPGA part: XC7A35T-1CPG236C
• 1 MSPS On-chip ADC: Yes
• Programming options: Quad-SPI Flash/JTAG
• Look-up Tables (LUTs): 20,800
• Flip-flops: 41,600
• Block RAM: 225 KB
• Clock Management Tiles: 5
• DSP Slices: 90
System Features:
• 512KB SRAM with an 8-bit bus and 8ns access times
• 4MB Quad-SPI Flash
• USB-JTAG Programming Circuitry
• Powered from USB or external 3.3-5.5V supply connected to DIP pins
System Connectivity
• USB-UART bridge
Interaction and Sensory Devices
• 2 LEDs
• 1 RGB LED
• 2 Push Buttons
Expansion Connectors
• 48-pin DIP connector with 44 Digital I/O and 2 Analog inputs (0-3.3V)
• One Pmod connector with 8 Digital I/O
