The Arduino IoT Bundle is the best way to discover the world of connected devices with the Arduino Nano RP2040 Connect. You will learn through 5 creative experiments with the help of online tutorials with step-by-step instructions available on the Arduino Project Hub platform.
Scope of delivery
• 1x Arduino Nano RP2040 Connect
• 6x phototransistors
• 1x tilt sensor
• 1x temperature sensor [TMP36]
• 3x potentiometer (10 kOhm)
• 1x piezo capsule
• 10x push buttons
• 1x DC motor
• 1x small servo motor
• 1x alphanumeric LC display (16x2 characters)
• 1x optocoupler [4N35]
• 1x H-Bridge motor driver [L293D]
• 2x Mosfet transistor [IRF520]
• 5x capacitor 100 uF
• 70x fixed switching wire bridge
• 2x wire bridge
• 1x microUSB cable
• 1x breadboard
• 1x LED bright white
• 3x LED blue
• 1x LED RGB
• 8x LED 5 mm red
• 8x LED 5 mm green
• 8x LED 5 mm yellow
• 1x pin header (40x1)
• 5x diode1
• 20x resistor 220 Ohm
• 5x resistor 560 Ohm
• 5x resistor 1 kOhm
• 5x resistor 4.7 kOhm
• 20x resistor 10 kOhm
• 5x resistor 1 MOhm
• 5x resistor 10 MOhm
External links
https://docs.arduino.cc/hardware/iot-bundle/#tutorials.
