Product Description
"For motorization of roller shutters with inlet windermotorized inlet winderfor plastic roller shutters up to 6 m² areaautomatic timer, safety shutdown and optional light controlMaxi roller shutter system with 23 mm belt width, hole spacing 165 or 185 mmPower supply via mains cable, end position safety device in case of power failureThe Schellenberg RolloDrive 65 STANDARD makes it possible to operate a roller shutter conveniently at the touch of a button or with an automatic timer.
The electric belt winder is suitable for plastic roller shutters up to an area of 6 m² and is compatible with the Maxi roller shutter system with a belt width of 23 mm.
It completely replaces an existing mechanical inlet winder.
The RolloDrive 65 STANDARD can be installed in all standard wall boxes with an opening height of at least 134 mm and has hole spacing of 165 or 185 mm.
It is also ideal for rental properties, as it is not necessary to open the roller shutter box for installation.
The integrated automatic timer makes it possible to raise or lower the roller shutter automatically at desired times.
For this in each case an up and/or a departure is programmable.
If the shutter blocks or encounters an obstacle, the electric belt winder stops automatically.
Large buttons on the RolloDrive 65 STANDARD make it easy to operate and set the end positions.
The power supply is via a power cable, should this be interrupted, the stored end positions are retained.
As an extension, the roller shutter can be controlled according to the position of the sun with a separately available sun sensor.
Thus, for example, furnishings and plants can be protected from excessive solar radiation.
Technical detailsDimensions (W x H x D): 59 x 210 x 34 mmInstallation dimensions (D x H): 139 x 132 mmHole spacing: 165 mm or 185 mmRoller shutter system: MaxiArea for plastic roller shutters: max.
6.0 m²Area for aluminum/wood roller shutters: max.
3.0 m²Shutter weight plastic: max.
4.5 kg/m²shutter weight aluminum/wood: max.
10,0 kg/m²Belt width: 23 mmBelt length at 23 mm width: 7.6 m at 1.0 mm belt thickness, 6.2 m at 1.3 mm belt thickness, 5.2 m at 1.5 mm belt thicknessMains cable length: 1.5 mOperating voltage: 230 V/50 HzMains cable: 2 x 0.75 qmm, H03VVH2-FRated power: 70 WPower stand-by: 0,5 WTorque: 10 NmSpeed: max.
30 rpmPulling force/initial pulling force: max.
45 kgShort time operation: 4 minutesProtection class: IIProtection class: IP20, only for dry roomsNumber of switching times: 2 (up and down)Number of operating buttons: 5Number of LEDs: 3Adjustment range sun automatic: 2.000 to 20.000 LuxPackage.
.
.
