Product Description
The analogue switch operates according to the principle of phase-angle control, i.e. the switching point on the sine wave in the load circuit depends on the control current. At 4 mA/0 V, the load circuit does not switch. 20 mA/10 V corresponds to a full wave (almost linear power transfer). The relay switches off every time the load current drops to zero. It switches on according to the control current/control voltage.
- Semiconductor relay single-phase AC voltage
- Analogue switches (phase-angle control) for applications with resistive and slightly inductive loads
- Control current: 4 to 20 mA/control voltage 0 - 10 V DC
- Rated operating current: 25, 50, 75, 100 and 125 AAC eff
- Rated operating voltage: up to 600 V AC eff
- Peak reverse voltage: up to 1400 Vs
- Isolation voltage via optocoupler: > 4000 VAC eff
- Integrated over-voltage protection (varistor)
- Brightness of the LED display depending on the control current
- Reverse polarity-proof and snap-in connector for voltage-controlled version
