Description
Solvent-free two-component epoxy resin-based adhesive for fast, resilient bonding. Enables high-strength bonded joints on almost all solid materials. The processing time is up to 5 minutes, and hand-tightness is achieved after 20 minutes. The final strength is approx. 1300 N/cm². The bonded joint hardens transparently, is impact-resistant, and is resistant to ageing and moisture.
Also in an easy-to-use double-chamber syringe for simple application of the two components in the correct mixing ratio.
Content: 15.5 grams
Materials
Sticks metal, glass, porcelain, ceramic, wood, marble, stone, concrete, thermosetting plastic, glass fibre-reinforced plastic, rigid PVC, rubber, hard-foam plastic, e.g. Styropor®. Not suitable for bonding on large glass surfaces, PE, PP.
Processing/Instructions for use
Bonding surfaces must be clean, dry and free from grease. Roughen smooth surfaces. Mix binder and hardener in a ratio of 1:1 (equal-length strands). Apply adhesive on one side, and on both sides for rough materials. Fit parts together without pressing them. Processing time (pot life): approx. 5 minutes. Curing time: at room temperature after approx. 20 to 30 minutes.
