Product Description
"This docking station by Delock enables the installation of an M.
2 NVMe and an M.
2 SATA SSD as well as an SD Express memory card and it can be connected via USB to the PC, laptop, tablet or smart phone.
The included USB cables allow the connection to a free USB port.
The included USB cables allow the connection to a free USB port.
SD Express slotThe SD Express slot allows to read and write SD Express memory cards.
SD, SDHC and SDXC memory cards with UHS-I and UHS-II can also be used.
Simultaneous using of all portsAll three memories can be used simultaneously.
Clone Function without PCThe built-in clone function allows to clone memory without using a PC.
It is possible to clone from NVMe to SATA, SD to NVMe, SD to SATA and SATA to NVMe.
Ideal test equipmentThe memory is simply plugged into the robust housing and can be used immediately.
No screws, tools or accessories are required, which means that the SSD can be changed quickly.
Power supply includedThe power supply, which is included, will be connected to the USB-C™ power connector and thus supplies the docking station and all connected memories with power.
Note If Windows shows an error message after duplicating a bootable operating system M.
2 SATA SSD to an M.
2 NVMe SSD, missing drivers must still be installed.
Specification Connectors: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female 2 x 67 pin M.
2 key M slot 1 x SD Express slot 1 x USB Type-C™ female (power supply)Chipset: JMicron JMS581Supports M.
2 modules with key M or key B+M based on PCIe (NVMe)Supports M.
2 modules with key B+M based on SATASupports NVM Express (NVMe)Supports S.
M.
A.
R.
T.
Supports TRIMSupports DevSleepSupports Native Command Queuing (NCQ)Data transfer rate up to 10 GbpsSupports SD 3.0 (UHS-I), SD 4.0 (UHS-II), SD 5.1 (UHS-II V90), SD 7.
1Supports UASPLED indicator for power, access and copy statusBootableFunction key: 1 x Clone button 1 x On / Off switch 1 x DIP switch for clone modeDimensions (LxWxH): ca.
76 x 79 x 18 mmHot Plug, Plug & PlaySystem requirements Android 10.0 or aboveChrome OS 90.0 or aboveiPad Air (4th Generation) or aboveLinux Kernel 5.8 or aboveMac OS 11.2.
3 or aboveSurface Pro 7Windows 8.1/8.1-64/10/10-64PC or laptop with a free USB Type-A port orDevice with a free USB Type-C™ port or with a free Thunderbolt™ 3 portPackage content.
.
.
