Description
PCI 4S Serial RS232 Card incl. LP bracket (SystemBase Chip set)
The EX-41384 PCI I/O card provides four serial RS232 High Performance UART 16C1050 outputs. It has been developed to expand four additional serial ports for PC, small workstation or server via the PCI or PCI-X bus. The board is fully plug-and-play compatible and supports Linux and SCO-Unix. The EX-41384 can also be installed in a low profile computer case with a maximum height of 8cm. In addition, +5V or +12V can be configured on pin 9 of the serial connector for a POS system (Power over System).
- Interface: RS232 V.24
- FIFO Buffer: 16C1050 with 256Byte
- ±15kV IEC1000-4-2 ESD protection for RS232 I/OS
- I/O addresses and interrupt are assigned by the system BIOS, IRQ Sharing
- Data Bits: 5, 6, 7, 8
- Stop Bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Flow Control RTS/CTS, XON/XOFF
- Supports 5V and 3.3V boards
- +5V or +12V can be set to pin 9 of all four connectors
Drivers: See Operating Systems
Operating system: Win 2000/XP/Vista/7/8.x/10 (32&64) Server 200x, SCO-Unix, Linux 2.4 or higher
Scope of delivery: EX-41384, Octopus cable, LP bracket, CD, manual
