Product Description
Schellenberg tubular motor Mini Plus 10 roller shutter motor and roller shutter control unit
- for octagonal shafts with 40 mm diameter
- for roller shutters up to a maximum surface area of 6.0 m² (plastic) ' Further information in the text
- Simple electronic end position adjustment at the touch of a button
- Ready to install with adapter and silent-running wall bearing, height-adjustable
- Retrofitting of radio control possible
All Schellenberg tubular motors open and close your roller shutters fully automatically and quietly. This puts an end to the strenuous manual operation of roller shutters. The roller shutter motor is operated with a roller shutter switch, a timer or by radio. You no longer need belt winders and belts, which wear out over time and have to be replaced. This is convenient, modern and looks elegant.
The Schellenberg Mini Plus 10 tubular motor is a powerful roller shutter drive for normal roller shutters up to a maximum area of 6.0 m² (applies to plastic roller shutters and may be less depending on the material, design and weight of the roller shutter). The maximum tensile force of the motor (25 kg) is decisive and must not be exceeded. The tubular motor is low-wear, smooth-running and maintenance-free and has a long service life. This makes the tubular motor ideal for your own home!
- Extremely smooth-running and maintenance-free motor
- low-wear
- ideal for your own home (increases the value)
- ready to install with adapter and silent-running wall bearing, height-adjustable
- Convenient electronic end position adjustment at the touch of a button
- Permanent data retention in the event of a power failure
- Adapter with large contact surface for optimum power transmission
- Reduced installation depth thanks to innovative driver
- Thermal overload protection
- For drive-up: obstacle detection and blocking protection
- Retrofitting of radio control possible
- Comprehensive and illustrated installation and operating instructions
The Mini Plus 10 tubular motor is suitable for simple installation in octagonal shafts with a diameter of 40 mm. The motor is mounted directly in the roller shutter shaft and transmits its power directly to the octagonal shaft (max. tensile force: 25 kg). This makes it the most effective and lowest-wear drive type.
The end positions of all Plus tubular motors are set electronically. These are conveniently set by pressing the setting knob on the motor head and remain permanently stored in the event of a power failure.
All Plus tubular motors can be controlled with various Schellenberg roller shutter control elements: E.g. with a roller shutter switch or a timer. It is also possible to retrofit a radio control at a later date.
With the control elements, you have the option of...
