Description
Schellenberg pipe motor Mini plus 10 roller shutter motor and roller shutter control
- For octagonal shafts with a diameter of 40 mm
- For roller shutters up to a maximum area of 6.0 m² (plastic) ' further information in the text
- Simple electronic end position adjustment at the touch of a button
- Ready to mount with adapter and glue-on wall bearing, height-adjustable
- Retrofitting of a radio control is possible
All Schellenberg tube motors open and close your roller shutters fully automatically and quietly. This means that the intensive use of the roller blinds by hand has an end. The roller shutter motor is operated with a roller shutter switch, a timer or by radio. You no longer need belt winder and belt straps that wear out and need to be replaced over time. It is comfortable, modern and looks classy.
The Schellenberg tube motor Mini plus 10 is a powerful roller shutter drive for normal roller shutters up to an area of up to 6.0 m² (applies to plastic roller blinds and may be smaller depending on the material, type and severity of the roller). The maximum tensile force of the engine (25 kg), which must not be exceeded, is decisive. The pipe motor is low-wear, smooth-running and maintenance-free and has a long service life. This makes the pipe motor ideal for your own home!
- Extremely smooth running and maintenance-free motor
- low wear
- Ideal for home use (increases value)
- Ready to mount with adapter and glue-on wall bearing, height-adjustable
- Convenient electronic end position adjustment at the touch of a button
- Permanent data retention in the event of a power failure
- Adapter with large contact surface for optimum power transmission
- Reduced installation depth due to innovative flights
- Thermal overload protection
- When driving up: Obstacle detection and blocking protection
- Retrofitting of a radio control is possible
- Comprehensive and illustrated installation and operating instructions
The Mini plus 10 pipe motor is suitable for easy installation in eight-point shafts with a diameter of 40 mm. The motor is mounted directly in the roller shutter shaft and transmits its power directly in the eight-point shaft (max. traction force: 25 kg). This makes it the most effective and wear-resistant drive type.
For all plus pipe motors, the end positions are set electronically. These are conveniently set by pressing the adjustment button on the motor head and remain permanently stored in the event of a power failure.
All plus pipe motors can be controlled with various Schellenberg roller shutter operating elements: For example, with a roller shutter or a timer. It is also possible to retrofit a radio control at a later date.
With the controls, you have the option of selecting the appropriate control for your...
