Description
The connectors have been developed for use in systems-, control- and electrical equipment engineering. It is the responsibility of the user to check whether the connectors can also be used in other areas of application.
To protect against unintentional opening of the connector, secure the thread between the housing and the connector head with a suitable cyanoacrylate adhesive when used in circuits with dangerous contact voltages. This does not apply to connectors used in SELV and PELV circuits in accordance with IEC 61140 (EN 61140, VDE 0140-1).
Please note the degree of contamination and the over-voltage category.
IP67- and IP68-rated connectors are not suitable for underwater use. When used outdoors, the connectors must be protected separately against corrosion.
The connector must not be plugged in or unplugged under load. Failure to comply with these instructions and improper use may result in personal injury.
