Description
With the PiEnergy-Mini, you can operate your Raspberry Pi with a voltage of 6 to 36 V DC.
You can power up and shut down your Raspberry Pi using the button integrated on the board.
Communication with the Raspberry Pi is via GPIO4, but this connection can also be cut by removing a resistor to free up the pin.
The ultra-flat design means that it can also be used in conjunction with many housings. The pin header is included and not soldered on to keep the design even flatter.
Specification
• ultra-flat design
• compatible with Raspberry Pi 3, 4, 5
• integrated button for powering up and shutting down the Raspberry Pi
• input voltage: 6 ... 36 V DC
• output voltage: 5.1 V
• Output current: max. 3 A (active ventilation recommended for additional connected loads)
• Interface to the Raspberry Pi: GPIO4
• Microcontroller: STM8S001J3
• Further connections: 5 V fan connector (2 pin/2.54 mm) / solder pads for external on/off switch
• Dimensions (LxWxH): 23 x 56 x 11 mm
Scope of delivery
• board with mounted heat sink
• pin header (2x5)
• spacer
• screw
• nut
