Description
Benning CM 12 True RMS power clamp multimeter
Features
- Display: digital
- Analogue bar graph display: yes
- 4-digit LCD display (9999 pixels)
- With screen backlight
- Power analysis in single-phase, three-phase and DC networks
Measuring functions- Current measurement range/DC 0.01 A - 600 A
- Current measurement range/AC 0.01 A - 600 A
- Current type: DC/AC
- True RMS measurement: yes
- AC voltage measurement: 10 mV - 1000 V
- DC voltage measurement: 10 mV - 1000 V
- Resistance measurement range: 0.1 Ohm - 100 kOhm
- Frequency measurement: 0.01 Hz - 10 kHz
- Frequency measurement: yes
- Capacitance measurement: 0.001 - 4000 µF
- Capacitance measurement: yes
- Active power measurement: 1 W - 600 kW
- Power factor cos phi: 0.01 - 1.00
- Continuity test/diode test
- Extended current measurement range via optional, flexible AC current probe converter (300.0 A/3000 A AC). LOG function (9999 measured values)
- MEM memory (1000 readings, A-SAVE)
- Bluetooth Low Energy 4.0 interface
- Free iOS and Android APP (from 4.3)
- LOG/ MEM can be downloaded
- Measured values can be saved in CSV format
- Low-pass filter (HFR) for measurements at motor drives
- Voltage sensor signals non-contact phase voltages/cable breaks in wires (optical)
- Inrush current measurement INRUSH
- Starting current of motors, lighting systems
- THD measurement, total harmonic distortion of harmonics
- Rotary field indicator
- Measurement range selection: manual/automatic
- Shutdown: automatic
- Momentary value memory Hold
- Maximum value memory MAX
- Minimum value memory MIN
- Peak value memory PEAK
- Average AVG
- Jaw size 33 mm
- Measuring circuit category: Cat IV
- Max. voltage of measuring circuit category: 600 V
- Measuring circuit category: Cat III
- Max. voltage of measuring circuit category: 1000 V
