INTELLINET INT 561402 - Switch, 10-port, Gigabit Ethernet, PoE+

Description

8-Port Gigabit Ethernet PoE+ Switch with 2 RJ45 Gigabit Uplink Ports

• 8x RJ45 Gigabit Ethernet (PoE+)
• 2x RJ45 Gigabit Ethernet uplink
• IEEE 802.3at/af Power over Ethernet (PoE+/PoE)-compliant
• 120 W PoE power budget
• Self-Healing Network
• Endspan
• Desktop

The 8-Port Gigabit Ethernet PoE+ from Intellinet Network Solutions transmits data and power to PoE-compatible devices over standard Cat5e or Cat6 network cables.
Equipped with 8 Gigabit Ethernet ports, this switch supplies WLAN access points, bridges, VoIP phones and IP cameras with up to 1,000 Mbps and a PoE power budget of 120 W.

Power over Ethernet 802.3at
This switch supports the IEEE 802.3at protocol and up to 30 watts of output power per port.
Connected IEEE802.3af or IEEE802.3at compliant devices do not require additional power, eliminating cabling time and cost.
Fewer power cables and power supplies thus provide a reduced, uncluttered look on ceilings and walls.
Any combination of PoE and non-PoE devices is supported, and with short-circuit, overload, and surge protection features, your devices are reliably protected.
For devices that are not 802.3at/af compliant (legacy WLAN access points or network cameras), we recommend using a PoE/PoE+ splitter from Intellinet Network Solutions.

Eliminate bottlenecks with 26 Gigabit ports
The eight auto-sensing RJ45 Gigabit Ethernet ports (10/100/1000 Mbps) provide ample power for your PCs, servers and other network devices.
Plus, two Gigabit uplinks increase the total available bandwidth up to 20 Gbps.

Self-Healing Network with More Reliability and Stability - Intellinet Powered Device Monitor (PDM)
This PoE switch has a ''self-healing'' PoE feature called ''Powered Device Monitoring.''
This PoE watchdog uses a so-called ''PD Alive Check'' to check all connected end devices for functionality and automatically resets devices that do not respond, such as PoE surveillance cameras, by interrupting the power supply and then switching it back on.
The PDM feature is especially useful in industrial or security environments where connected network devices are essential.
An added value of the PD Alive function is the avoidance of unnecessary calls to Tech Support and expensive on-site visits by service technicians.
The functional reboot is often enough to bring the unresponsive device back online.

• Power and data connectivity for up to eight PoE network devices
• Two RJ45 Gigabit uplink ports
• PoE power budget 120 watts
• Powered Device Monitor (PDM) feature monitors all connected PoE devices and restarts them when inactive
• IEEE 802.3at/af compliant RJ45 PoE/PoE+ outputs
• Output power up to 32 watts per port*
• Manual mode for increased PoE range (reduces network...