Once the headlights have a matte finish, headlights should be polished. With this headlight polish kit you will keep the luminosity of the headlight. Especially at night, a full luminous function of the headlights is mandatory!
Safety through visibility
The luminosity of the headlights is important for safety on the road
Let blind and matte headlights see again
Matte and fogged headlights no longer have full luminosity, limiting the field of vision
Complete headlight polish set
In the scope of supply of our headlight polish set / headlight preparation set is already included everything. After the headlight polish, use the sealant and effectively protect the headlights from the elements
Headlight polishing save costs
With the polish and the headlight care you save not only costs but also time. The polishing of the headlights you perform independently, so you avoid long waiting times and high fees of the workshops.
Uncomplicated application
The instruction manual guides you safely through the steps, so that you can effectively polish the headlights
Instructions for use
1. clean the surface thoroughly with a cloth and cover the headlight with the enclosed tape so that the paint is not damaged by sanding.
2. one by one, use the P800, P1200 and P2000 grit sandpapers and wet sand your headlights.
Note: Use circular movements and light pressure to sand the entire headlight evenly. Moisten the sandpaper or the headlight with water. Use the lowest speed when using the drill attachment. 3.
Remove the sandpaper from the polishing wheel and attach the enclosed sponge to the polishing wheel. Now apply the polish to the sponge and polish the headlight to a high gloss.
4. now clean the headlight with water and then dry it. Also clean the sponge thoroughly with clear water. Now remove the adhesive tape. Please make sure that the headlight is completely transparent, cleaned and dry after polishing.
5. first place your vehicle / headlight in a garage in the shade. Now cover the headlight again with the enclosed adhesive tape. Apply the ''Step 3'' UV protection fluid evenly to the headlight with the clean sponge.
Wait 10-15 minutes so that the liquid is evenly distributed on the headlight. After that, put your vehicle/headlight after outside and let it dry in the sunlight for 2-3 hours so that the UV protection liquid will cure quickly and no dust will accumulate. The UV protection fluid needs this natural UV radiation to dry. A commercially available UV lamp can be used as an alternative to sunlight. Allow vehicle/headlights to dry afterwards. Car wash is possible again after 24 hours.
Scope of delivery
• 1x 85gr. Polishing paste
• 2x 3 ml UV protection
• 6x sandpaper (2 each of the grits P800, P1200, P2000)
• 1x masking tape
• 1x sponge...
