Product Description
"Multifunction time lag relay, 1 changeover contact, modular device for rail mountingThe functions and the times are entered by pushing a button and are displayed digitally on an LCD screen.
Only two pushbuttons are used to do this.
When setting the time, all values can be entered in the pre-selected time frames (0.1 - 9.9 or 1 - 99 seconds, minutes or hours).
The longest time is therefore 99 hours.
600 time settings are possible.
The time entered is shown permanently on the digital display.
Using a bistable relay ensures that there is no heating or power loss from the coil even when the relay is switched on.
Eltako duplex technologyThanks to duplex technology, the usually potential-free contacts are able to switch to zero-crossing, which significantly reduces wear.
The maximum load can be used from a delay time or cycle time of five minutes.
For shorter times, the maximum load is reduced as follows: Up to two seconds at 15%, up to two minutes at 30% and up to five minutes at 60%.
Universal control voltage 8 - 230 VStand-by loss only 0.05 - 0.5 W"
