Product Description
LPC1778FBD208: Scalable Mainstream 32-bit Microcontroller (MCU) based on Arm® Cortex®-M3 CoreOverview:The LPC1778 is a Cortex-M3 microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 120 MHz.
Features include 512 kB of flash memory, 96 kB of data memory, Ethernet, USB 2.0 device/host/OTG , 8-channel DMA controller, 5 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I2C, I2S, 8-channel 12-bit ADC, 10-bit DAC, QEI, SD/MMC, motor control PWM, 4 general purpose timers, 6-output general purpose PWM, ultra-low power Real-Time Clock with separate battery supply, and up to 165 general purpose I/O pins.
Features:• Functional replacement for LPC23xx and 24xx family devices• Arm Cortex-M3 processor, running at frequencies of up to 120 MHz• Arm Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)• Multilayer AHB matrix interconnect provides a separate bus for each AHB master• Split APB bus allows for higher throughput• Cortex-M3 system tick timer, including an external clock input option• Standard JTAG test/debug interface, Serial Wire Debug and Serial WireTrace Port• Emulation trace module supports real-time trace• Boundary scan for simplified board testing• Non-maskable Interrupt (NMI) input• 512 kB on-chip flash program memory• 96 kB on-chip SRAM• 4 kB on-chip EEPROM• In-System Programming (ISP) and In-Application Programming (IAP) capabilities• External Memory Controller (EMC)• Eight channel General Purpose DMA controller (GPDMA)• Ethernet MAC with MII/RMII interface and associated DMA controller• USB 2.0 full-speed dual port device/host/OTG controller with on-chip PHY and DMA• Five UARTs with fractional baud rate generation• Three SSP controllers with FIFO and multi-protocol capabilities• Three enhanced I2C-bus interfaces• I2S (Inter-IC Sound) interface for digital audio input or output• CAN controller with two channels• SD/MMC memory card interface• Up to 165 General Purpose I/O (GPIO) pins• Two external interrupt inputs configurable as edge/level sensitive• Four general purpose timers/counters• Quadrature encoder interface that can monitor one external quadrature encoder• Two standard PWM/timer blocks with external count input option• Real-Time Clock (RTC) with a separate power domain• Windowed Watchdog Timer (WWDT)• CRC Engine block• 12-bit Analog-to-Digital Converter (ADC) with conversion rates up to 400 kHz• 10-bit Digital-to-Analog Converter (DAC)• Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deep power-down• Wake-up Interrupt Controller (WIC)• Processor wake-up from Power-down mode via any interrupt• Brownout detect with separate threshold for interrupt and forced reset• On-chip Power-On.
.
.
