Product Description
Solvent-free two-component adhesive on epoxy resin basis for highest loads.
The processing time is up to 90 minutes.
Curing time and final strength are temperature-dependent.
At room temperature, solid after 12 hours.
The bonded joint is impact-resistant, and is resistant to ageing and moisture.
Also in an easy-to-use double-chamber syringe for simple application of the two components in the correct mixing ratio.
Content: 33 gramsMaterialsSticks metal, glass, porcelain, ceramic, wood, marble, stone, concrete, thermosetting plastic, glass fibre-reinforced plastic, rigid PVC, rubber, hard-foam plastic, e.
g.
Styropor®.
Not suitable for bonding on large glass surfaces, PE, PP.
Processing/Instructions for useBonding surfaces must be clean, dry and free from grease.
Roughen smooth surfaces.
Mix binder and hardener in a ratio of 1:1 (equal-length strands).
Apply adhesive on one side, and on both sides for rough materials.
Fit parts together without pressing them.
Processing time (pot life): approx.
90 minutes.
Curing time and final strength are temperature-dependent, at room temperature secure after approx.
12 to 24 hours.
