Description
Homematic IP wall thermostat with switching output - for brand switches, anthracite
Individual control of 230 V actuators for underfloor heating via relay output according to the defined heating profiles.
The Homematic IP wall thermostat with switching output is part of the Homematic IP smart home system and controls 230 V floor heating actuators via relay output.
The wall thermostat with switching output thus makes it easy to upgrade a conventional underfloor heating control to intelligent control of the room temperature by replacing the previous bimetal controller.
This increases living comfort and actively helps to save energy.
The smart solution offers up to three individually adjustable heating profiles and another three freely adjustable cooling profiles, each with six heating phases as well as 13 switching times per day.
The Homematic IP wall thermostat with switching output can be used to conveniently select the target temperature in 0.5 °C increments using the dial.
The large illuminated display shows the set and actual temperature as well as the humidity.
In addition, all values can also be read and set via the Homematic IP app.
The wall thermostat is mounted in classic flush-mounted boxes, which makes it much easier to replace existing wall thermostats.
The dimensions of the Homematic IP wall thermostat even allow it to be integrated into multiple frames from leading manufacturers.
If the thermostat is to be used without the Homematic IP Access Point or without the Homematic CCU2 central control unit, the desired settings can be selected directly on the thermostat without a smart home connection.
- Simple upgrade of a conventional underfloor heating control to intelligently controlled regulation of the room climate via smartphone by replacing the existing wall thermostats.
- Measurement and display of set and actual temperature as well as humidity on large illuminated display
- Up to 6 individually adjustable heating profiles (3x heating, 3x cooling) with 6 heating phases each and 13 switching times per day for demand-based heating
- Manual setting of the target temperature (accurate to 0.5 °C) directly on the setting wheel
- Simple installation in existing flush-mounted box Integration in multiple frames or in frames from other manufacturers (Berker, Busch-Jaeger, ELSO, Gira, Merten, JUNG)
- Commissioning and configuration of floor heating possible directly at the wall thermostat (also without Homematic IP Access Point or Homematic CCU2)
- Can be operated with the Access Point in conjunction with the Homematic IP App (without follow-up costs), the Homematic CCU2 central control unit as well as with many partner solutions
