Product Description
Solvent-free two-component adhesive on epoxy resin basis for particularly fast adhesion on small surfaces.
The processing time is up to 2 minutes, and hand-tightness is achieved after 5 minutes.
The final strength is approx.
800 N/cm².
The bonded joint hardens transparently, is impact-resistant, and is resistant to ageing and moisture.
Content: 35 gramsMaterialsSticks metal, glass, porcelain, ceramic, wood, marble, stone, concrete, thermosetting plastic, glass fibre-reinforced plastic, rigid PVC, rubber, hard-foam plastic, e.
g.
Styropor®.
Not suitable for bonding on large glass surfaces, PE, PP.
Processing/Instructions for useBonding surfaces must be clean, dry and free from grease.
Roughen smooth surfaces.
Mix binder and hardener in a ratio of 1:1 (equal-length strands).
Apply adhesive on one side, and on both sides for rough materials.
Fit parts together without pressing them.
Pot life: approx.
2 minutes.
Hardening: At room temperature, hand-tightness is achieved after 5 minutes at the latest.
