Product Description
"The LUPUSEC Dual way motion detector is set up and controlled via the LUPUSEC alarm panel.
This premium motion detector detects motion using two methods: Microwave field measurement by a dedicated microwave sensor is added to the tried-and-tested heat field measurement by infrared sensors.
The alarm is only triggered when both sensors detect movement of a person.
This results in an exceptionally high reliability of motion detection, and false alarms are virtually eliminated.
For this purpose, the motion detector simply needs to be mounted where the motion detection is to take place.
Like all sensors, the dual motion detector is also battery-operated and is connected to the alarm system via radio.
Therefore, it can be easily attached to any wall or ceiling of your choice.
Cables for signal transmission or power supply via power supply are NOT necessary.
Simply connect the motion detector to the alarm system via the control panel and set it up.
Technical Data:Horizontal Detection Angle 110°Sensor dimensions 60 x 113 x 63 mm (TxHxB)Weight 0.140 kgDetection Method Of Heat Field MeasurementMicrowave Field MeasurementSensor type PIR + microwave pulse DopplerCurrent consumption 12V DC, 30mA max.
Optimum installation height between 1.9 - 2mMicrowave frequency 10,525 GHzOperating temperature -10°C to +45°C (indoor only)Tamper Monitoring Yes, Opening ContactTamper display of the sensor on the control panel YesStatus monitoring by the control panel YesStatus display on the control panel YesBattery indicator on the control panel YesStatus monitoring of the battery in the control panel automaticallyRadio frequency 868.6625 MHzRadio power max.
10mWTransmitter Range Approx.
30 to 100 metersModulation FMMounting options screwed, glued in 1.8-2m heightPower supply CR123A 3V lithium batteryBattery life on average 3 yearsMounting location walls, in cornersIncludes:Motion Detector BatteryScrews and dowels Corner Bracket"
