Description
Schellenberg ROLLODRIVE 105 STANDARD / Electric belt winder
- Electric belt winder: Ideal for tenants (simple installation under the plaster)
- For roller shutters up to a maximum area of 10.0 m² (plastic) or up to a maximum area of 6.0 m² (aluminum) ' further information in the text
- For wide 23 mm (system maxi) belts and for a hole spacing of 215 mm or 245 mm
- Incl. automatic timer, automatic obstacle detection, blocking protection, sun and twilight function as well as 3 LEDs
- Low consumption in stand-by mode as well as data and end position backup in the event of a power failure
With the electric belt winder for roller shutter belts (ROLLODRIVE) from Schellenberg, you have uncomplicated and easy-to-install helpers at hand: The belt winder drives roller shutters up and down automatically at the push of a button. The belt belts of the roller shutters do not have to be operated by hand at the most intensive time! The winding and unwrapping of the belt belts, with the help of which the roller shutters are opened and closed, are carried out by electric roller shutters belt winder for you.
With the Schellenberg roller shutter belt winder ROLLODRIVE 105 STANDARD, you can open and close roller shutters automatically or conveniently at the touch of a button. The roller shutter is opened and closed with a conventional belt. However, the belt is electrically driven by the ROLLODRIVE 105 STANDARD belt winder. With this form of roller shutter control, you no longer have to pull on the belt strap by hand.
The electric belt winder ROLLODRIVE 105 STANDARD can be driven up and down roller shutters with an area of up to 10.0 m². This information applies to plastic roller shutters and may be lower depending on the material, type and severity of the roller shutter. The weight of the roller shutter is decisive when it has been completely shut down.
Thanks to its strength, the electric roller shutter belt winder ROLLODRIVE 105 STANDARD works very smoothly and fits into any living environment thanks to its compact design. Due to the simple installation and removal (flush mounting), the inlet winder is always interchangeable and moves with it to the new apartment. This roller shutter drive is therefore also ideally suited for tenants, as the roller shutter box does not have to be opened during assembly.
The Schellenberg ROLLODRIVE 105 STANDARD is suitable for belt belts with a width of 23 mm. The hole spacing for mounting is 215 mm or 245 mm.
Package Contents- Electric belt winder
- Power cord (1.5 m)
- Release Chamber
- Fixing Screw
- Power Supply Clamp
- 4x clamping screw
- Belt Shaft Cover
- Bottom cover
- Quick Reference Guide
- Installation Instructions
