Product Description
"FeaturesPayload: 3.5 kgRepeatability: +/- 0.1 mmRange: 700 mmDOF: 7Weight: 13.7 kgIntelligent power management: AC and DC Control Box available (optional)The UFactory xArm is the industrial development of the very popular desktop robot arm, the uArm.
The xArm has a payload of up to 3.5 kg with a range of up to 700 mm.
Thanks to its high degree of flexibility coupled with the many interfaces to third-party software, this robotic arm represents a real alternative to many products on the market.
Advantages compared to competitor productsCompared to competitors, the following factors are of particular interest for the xArm:High return-on-investment:The xArm is relatively inexpensive in a direct comparison, meaning that the payback time is extremely low.
Excellent weight/performance ratio:With a mass of 13.7 kg, the xArm5 Lite can handle a payload of up to 3.5 kgUnique power management system (AC/DC):Owing to the switch between an AC and DC Control Box, the xArm can be operated very well as a mobile manipulator on a UGV both in a stationary position and with the DC Control BoxEthernet connectivity:The xArm can be integrated into the network using static IP and then programmed and monitored via the xArm Studio.
Technical dataVoltage: 24 - 28 VCurrent: approx.
17 APower consumption: 400 WEnd effector interface: RS4858 x Digital In/8 x Digital Out/2 x Analogue In/2 x Analogue OutInterfaces: Ethernet and RS485xArm Control BoxThe xArm Control Box handles communication between the robot arm and third-party devices, allowing additional sensors, end effectors or accessory components to be connected to them.
In addition, each xArm comes as standard with the AC Control Box, but a DC Box can also be purchased as an accessory.
The DC Box enables operation via 24 V.
Included in delivery:1 x xArm71 x AC Control Box3 x robotic arm signal cables1 x network cable1 x Robotic Arm End Effector adapter cablexArm quick-start guide"
