Description
Programming adapter for AVR-ISP, UPDI, STM32, NXP and ESP
EXA-Prog stands for the new generation of ISP programmers, which are not limited to one specific microcontroller type, but support several different controller architectures and programming interfaces.
As the successor of the popular DIAMEX ALL AVR, the EXA-PROG offers more programming modes and a built-in function for self-checking all signals on the programming lines with the associated Exa tool.
Laser cut plexiglass housing. Two built-in status LEDs indicate the current status of the programmer. Electronics and housing are completely ''made in Germany''.
Supported microcontrollers
- ATMEL/Microchip AVR, MegaAVR, TinyAVR controller with ISP interface (MISO, MOSI, SCK, RESET) or alternatively (PDI, PDO, SCK, RESET).
- ATMEL/Microchip TinyAVR, AVR-DA controller with UPDI interface. With high voltage function for controllers with deactivated UPDI pin
- STM32 32-bit ARM Cortex-M controllers, which have an internal UART bootloader
- NXP LPC 32-bit ARM Cortex-M controllers with internal UART bootloader
- ESP8266, ESP32, ESP32-S2 controllers and modules via internal UART bootloader
Programming modes- AVR-ISP
- AVR-UPDI and AVR-UPDI-HV
- STM32, Cortex-M
- NXP/LPC, Cortex-M
- ESP8266, ESP32, ESP32-S2
- USB serial interface
Special features
- Function selection via DIP switches
- Signal level switchable, 3.3V, 5V
- integrated high voltage generator for UPDI programming
- Automatic bit rate adjustment in AVR-ISP mode
- Clock generator for AVR controller with fuse oscillator
- Button to reset the connected microcontroller
- 10-pin standard ISP connector
- optional accessories: 10-pin to 6-pin adapter, ESP01 adapter
- Mini-USB connector for power supply and connection to PC
- Firmware updateable via USB
- Windows PC tool for testing the signal levels at the programming connector
Technical data
- Current consumption without microcontroller connected: approx. 30mA
- Signal level at programming connector: 5V (USB voltage) or 3.3V
- Power supply for external circuit: max. 300mA (3.3V), max. 500mA (5V)
- UPDI high voltage: approx. 12.3V
- Case size: approx. 55x40x10mm
- Weight: approx. 25g
Scope of delivery- EXA-PROG in coloured plexiglass case(colour may vary)
- ribbon cable 10-pin with connectors, approx. 15cm length
- Mini-USB cable
