Is connected between the solar panel 12 V and 1 or 2 batteries to prevent overcharging If 2 batteries are connected, they will be charged separately. The battery with the lowest charge voltage receives more charging current. With LED displays + high loading capacity: max. 2 x 8 A or 1 x 16 A.
Technical data:
Input voltage solar panels 15 - 30 V/DC open circuit voltage, 12 V/DC rated voltage
Max. Charging current 16 A total (2 batteries a max. 8 A each or 1 battery connected in parallel at both outputs up to 16 A)
Ports 1 or 2 batteries, 12 V/DC If only 1 battery is connected, it must be connected to port ''2''.
Displays: each battery displays ''Battery charging'', 1 display
Cooling For currents> 4 A, the metal underside of the module must be screwed on to a heat sink with a surface area of > 300 square cm.
Fuse A back-up fuse of F16 A is required (not included)
Switch-on battery voltage approx. < 13.4 V/DC (± 5%)
Switch-off voltage ''Battery full'' approx. 14.4 V/DC (± 5%)
Current consumption (taken from the battery) < 2 mA
Reverse-current-proof (no additional diode required)
Connection with 6.35-mm flat plug sleeves
Dimensions: approx. 87 x 60 x 32 mm
