EDIMAX EDI GS-5210PL - Switch, 12-Port, Gigabit Ethernet, PoE+, SFP

Description

Monitoring VLAN 12-Port Gigabit PoE+ Web Smart Switch for Long Haul with 2 Gigabit RJ45 Ports and 2 SFP Ports

• 10 x RJ45 10/100/1000Base-T Gigabit ports
• 2 x SFP uplinks
• 24 GBit/s switching capacity
• IEEE 802.3af (PoE), IEEE 802.3at (PoE+)

Compliant with ONVIF Profile Q For quick installation of security devices
With ONVIF Profile Q standards, the GS-5210PL enables system integrators to easily set up, quickly discover, configure and control ONVIF-compliant products on the network. Just plug it in and go.

More than secure Everything fits together
The series of EDIMAX ONVIF switches greatly enhances IP surveillance networks by supporting the ONVIF Profile Q standard, which is compatible with ONVIF-compliant devices with profiles G/Q/S/A/C/T/M, providing quick and easy system setup, device discovery and user authentication.

High security
The built-in replenishment protection or PoE detection function ensures that the PoE network remains secure and efficient.

Powerful data processing
With a backplane bandwidth of 24 Gbps and a forwarding rate of 17.8 Mpps, the GS-5210PLC enables maximum available bandwidth utilization without delay.

Robust failover mechanisms
Two firmwares are stored on the GS-5210PL for backup. It can activate the backup firmware immediately while the current firmware has problems.

Guaranteed to cover 200 meters distances
While conventional Ethernet switches have a distance limitation of 100 meters, the GS-5216PLC offers extended power and data transmission distance up to 200 meters in long-haul mode with 10 Mbps full-duplex operation on a per-port basis.
This is ideal for long distance applications such as IP cameras, VoIP phones, access points, and PoE-enabled IoT devices in remote locations.

4-Digit LED Display Instant Power Consumption Display
In addition to a web-based GUI for tracking port performance, the GS-5210PL has an intuitive 4-digit LED display that shows its power consumption. System integrators can keep track of total and per-port power consumption, as well as available remaining power.
All this with just one hardware selection button.

Safe protection against power backfeed
Each port is equipped with power backfeed protection to prevent damage to PoE ports while non-standard power devices are connected.

*Maximum performance, actual data transfer speeds, and range change depending on network conditions and environmental factors.
*Network camera resolution and frame rate are dependent on connection speed.
*Product specifications and design are subject to change without notice.