Product Description
Special type for permanent, strong bonding of rough and uneven surfaces. The special valve allows the spray volume to be infinitely adjusted (low/middle/high).
Areas of application
Also for large-area bonding of:
- Felt, PVC film, artificial leather, carpeting
- plastic, cardboard
- Foam and sponge rubber
- Insulation materials, flexible foam
- Vinyl, leather, rubber, metal and wood
Article characteristics
Synthetic rubber base
Application temperature + 10 to + 30 °C
Flash-off time 5 to 10 minutes
Open time maximum 45 minutes
Temperature resistance - 20 to + 80 °C
Coverage approx. 4 m²
Application
1. shake can before use. Surfaces must be dry, clean and free of grease. Spray onto a surface at a distance of 15 to 30 cm. In the case of porous materials, the Adhesive Spray should be applied to both surfaces.
2 Depending on the surface condition and ambient temperature, allow the spray to dry (approx. 10 minutes) until the adhesive is no longer fibrous.
3. position the parts and join them together with firm pressure.
