Product Description
RJ45 patch cable Cat.5e, 100 MHz, shielded (S/UTP), pin assignment 1:1, halogen-free jacket
The shielded Datwyler patch and connection cables are fitted with a molded shielded RJ45 plug and kink protection on both sides. The cable type used here, CU 5502 flex 4P, has an excellent shielding effect thanks to a strongly overlapping copper braid and is nevertheless very flexible.
- Pin assignment: 1:1
- Category: 5e
- GBit/s: Up to 1 GBit/s
- Operating capacitance: 45 pF/m
- NVP %: 75
- Skew (propagation delay difference): 15 ns/100 m
- Shielding: shielded
Compliance with the 6 kV surge voltage test in accordance with IEC 60664-1 when laid in meter stations and electrical distribution boards. As a cabling solution for intelligent and digital meter systems (smart meter applications).
Further properties:- Cable type: S/UTP
- Connector type, connection 1: RJ45 8(8)
- Connector type, connection 2: RJ45 8(8)
- Kink protection sleeve: molded on
- AWG: 26
- Solid / Flex: Flex (stranded wire)
- Connection type: Piercing
- Contact surface: Gold-plated
- Mating cycles: 750
- Tensile force on connector: 50
- Minimum bending radius: 20 mm
- Repeated bending: 1000 cycles
- Tensile strength (4P): 63 N
- Conductor material: Stranded copper wire
- Cable construction: 4x2
- Arrangement of cores: 4 pairs twisted
- Sheath material: FRNC/LS0H
- Cable raw material: CU 5502 flex
Standards:- Smoke density: EN 61034-1/-2, IEC 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Section 4.3.3 SD
- Halogen-free, corrosivity: EN 60754-1/-2, IEC 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Section 4.3.3 SA
- Flame retardancy: EN 60332-1-2, IEC 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Section 4.3.3 F1
- Wiring standards: EN 50173-1, ISO/IEC 11801-1
- Cat./Class: Cat.5e/ Class D
- Connector standard: IEC 60603-7-5
- PoE: IEEE 802.3bt Type 4 (100W)
