Product Description
This converter by Delock enables the simultaneous operation of an M.2 NVMe SSD, in 2280, 2260, 2242 and 2230 format, and a 2.5'' or 3.5'' SATA HDD or SSD through the USB interface.
Clone Function without PC
The built-in clone function allows to clone memory without using a PC. It is possible to clone from NVMe to SATA and SATA to NVMe.
Specification
- Connectors:
1 x USB 10 Gbps USB Type-C™ female
1 x M.2 key M slot
1 x SATA 6 Gb/s 22 pin receptacle
1 x DC jack - Chipset: JMicron JMS581D
- Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key M or key B+M based on PCIe (NVMe)
- Maximum height of the components on the module: 1.5 mm, application of double-sided assembled modules supported
- For 2.5'' and 3.5'' SATA HDD / SSD
- Supports NVM Express (NVMe)
- Supports S.M.A.R.T.
- Supports TRIM
- Supports Native Command Queuing (NCQ)
- Data transfer rate up to 10 Gbps
- Supports UASP
- 7 x LED indicator for power, access and copy status
- Bootable
- Function key:
1 x Clone button
1 x On / Off switch
1 x switch for clone mode - Dimensions (LxWxH): ca. 107 x 35 x 24 mm
- Hot Plug, Plug & Play
System requirements - Android 11.0 or above
- Chrome OS
- Linux Kernel 5.15 or above
- Mac OS 12.4 or above
- Windows 10/10-64/11
- iPad Air (4th Generation) or above
- iPad Pro (3rd Generation) or above
- Surface Pro 7
- PC or laptop with a free USB Type-A port or
- Device with a free USB Type-C™ port or with a free Thunderbolt™ 3 or Thunderbolt™ 4 port
Package content - USB Type-C™ converter
- Cable USB-C™ male to USB-C™ male, length ca. 80 cm
- Cable USB-C™ male to USB Type-A male, length ca. 80 cm
- 3 x rubber nipple
- External power supply 12.0 V / 3.0 A
- User manual
Power supply specification - Wall power supply
- Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.5 A
- Output: 12 V / 3 A
- Ground outside, plus inside
- Dimensions:
inside: ø ca. 2.5 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
Package
