Product Description
8-bit AVR® Microcontroller with 2K Bytes FlashDescription The high-performance, low-power Microchip 8-bit AVR RISC-based microcontroller combines 2KB of ISP flash memory, 128B ISP EEPROM, 128B internal SRAM, one 8/16 bit timer/counter with prescaler, one 8/10-bit high-speed timer/counter with PWM and separate prescaler, 10-bit A/D converter, a USI (Universal serial interface), and debugWIRE for on-chip debugging.
The device supports throughput of 20 MIPS at 20 MHz and operates between 1.8-5.5 volts.
By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.
Features• High-performance, Low-power AVR® 8-bit Microcontroller• RISC Architecture– 118 Powerful Instructions – Most Single Clock Cycle Execution– 32 x 8 General Purpose Working Registers– Fully Static Operation– Up to 16 MIPS Throughput at 16 MHz• Data and Non-volatile Program Memory– 2K Bytes of In-System Programmable Program Memory FlashEndurance: 10,000 Write/Erase Cycles– 128 Bytes of In-System Programmable EEPROMEndurance: 100,000 Write/Erase Cycles– 128 Bytes Internal SRAM– Programming Lock for Flash Program and EEPROM Data Security• Peripheral Features– 8-bit Timer/Counter with Separate Prescaler– 8-bit High-speed Timer with Separate Prescaler 2 High Frequency PWM Outputs with Separate Output Compare Registers Non-overlapping Inverted PWM Output Pins– Universal Serial Interface with Start Condition Detector– 10-bit ADC 11 Single Ended Channels 8 Differential ADC Channels 7 Differential ADC Channel Pairs with Programmable Gain (1x, 20x)– On-chip Analog Comparator– External Interrupt– Pin Change Interrupt on 11 Pins– Programmable Watchdog Timer with Separate On-chip Oscillator• Special Microcontroller Features– Low Power Idle, Noise Reduction, and Power-down Modes– Power-on Reset and Programmable Brown-out Detection– External and Internal Interrupt Sources– In-System Programmable via SPI Port• I/O and Packages– 20-lead PDIP/SOIC: 16 Programmable I/O Lines– 32-lead QFN/MLF: 16 programmable I/O Lines• Operating Voltages– 2.
7V - 5.
5V for ATtiny26L– 4.
5V - 5.
5V for ATtiny26• Speed Grades– 0 - 8 MHz for ATtiny26L– 0 - 16 MHz for ATtiny26• Power Consumption at 1 MHz, 3V and 25°C for ATtiny26L– Active 16 MHz, 5V and 25°C: Typ 15 mA– Active 1 MHz, 3V and 25°C: 0.70 mA– Idle Mode 1 MHz, 3V and 25°C: 0.18 mA– Power-down Mode: < 1 µA
