Description
8-Port PoE+ Gigabit Switch with PoE Passthrough
One Ultra PoE++ IEEE 802.3bt (4PPoE) PD PoE port with 90 W input power, seven PSE PoE ports, PoE power budget up to 85 W, IEEE 802.3at/af compliant
- Supports up to 90 W input power from a PoE injector or PoE switch
- Power and data connectivity for up to seven PoE network devices
- Doubles the connection range between PoE source and device from 100 m to 200 m
PoE passthrough technology for added value and longer rangeThis 8-port Gigabit switch from Intellinet Network Solutions brings PoE passthrough technology as its most important feature, which means it can also be used as a PoE extender.
It takes power and data from a PoE switch or injector and extends that connection to seven output ports for an additional 100m.
It is powered exclusively by PoE, which makes you completely independent of existing power outlets when placing it, saving a lot of money on cabling.
Power over Ethernet 802.3atThis switch supports the IEEE 802.3at protocol, delivering up to 30 watts of power per port*.
IEEE802.3af or IEEE802.3at compliant devices connected to the switch do not require additional power, saving significant cost and time in running power lines and eliminating a lot of cable clutter and adapters in exposed locations such as walls and ceilings.
Any combination of PoE and non-PoE devices is supported, and thanks to protection against short circuits, overloads and surges, your equipment is well protected.
For devices that do not support the 802.3at/af standard (older access points or network cameras), we recommend using an Intellinet PoE/PoE+ splitter.
Gigabit speed instead of bottleneckEquipped with seven auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers huge performance for computers, servers and other network devices.
Green Ethernet TechnologyNetwork switches rarely use all ports at the same time. When a PC, notebook, printer or other device on the network is turned off, a normal switch continues to consume just as much power as if those devices were turned on.
Thanks to energy-efficient IEEE 802.3az technology, this switch automatically detects the status of all connected devices and reduces the power consumption of unused ports.
It can also adjust its own power consumption based on the length of the connected network cables.
This combination saves you energy and therefore money.
* The total PoE budget of this switch is 85 watts when used at 90W input power from an Ultra PoE IEEE 802.3bt switch or injector. Maximum usage on any one port is 30 watts.
- Supports up to 90 W input power from a PoE injector or PoE switch
- Power and data connectivity for up to seven PoE network devices
- Doubles the connection range...
