Product Description
"RJ45 patch cable Cat.
5e, 100 MHz, shielded (S/UTP), pin assignment 1:1, halogen-free jacketThe shielded Datwyler patch and connection cables are fitted with a molded shielded RJ45 plug and kink protection on both sides.
The cable type used here, CU 5502 flex 4P, has an excellent shielding effect thanks to a strongly overlapping copper braid and is nevertheless very flexible.
Pin assignment: 1:1Category: 5eGBit/s: Up to 1 GBit/sOperating capacitance: 45 pF/mNVP %: 75Skew (propagation delay difference): 15 ns/100 mShielding: shieldedCompliance with the 6 kV surge voltage test in accordance with IEC 60664-1 when laid in meter stations and electrical distribution boards.
As a cabling solution for intelligent and digital meter systems (smart meter applications).
Further properties:Cable type: S/UTPConnector type, connection 1: RJ45 8(8)Connector type, connection 2: RJ45 8(8)Kink protection sleeve: molded on AWG: 26Solid / Flex: Flex (stranded wire)Connection type: PiercingContact surface: Gold-platedMating cycles: 750Tensile force on connector: 50Minimum bending radius: 20 mmRepeated bending: 1000 cyclesTensile strength (4P): 63 N Conductor material: Stranded copper wireCable construction: 4x2Arrangement of cores: 4 pairs twistedSheath material: FRNC/LS0HCable raw material: CU 5502 flexStandards:Smoke density: EN 61034-1/-2, IEC 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Section 4.3.
3 SDHalogen-free, corrosivity: EN 60754-1/-2, IEC 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Section 4.3.
3 SAFlame retardancy: EN 60332-1-2, IEC 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Section 4.3.
3 F1Wiring standards: EN 50173-1, ISO/IEC 11801-1Cat.
/Class: Cat.
5e/ Class DConnector standard: IEC 60603-7-5PoE: IEEE 802.
3bt Type 4 (100W)"
