Description
Mobile charging station Universal type 2 CEE 16 a / 3-phase + protective contact (up to 11 kW)
True electromobility: With the mobile charging station Universal Type 2 CEE 16 a / 3-phase + protective contact (up to 11 kW) you can charge your hybrid or electric vehicle flexibly on the way. The Mode 2 charging cable can be connected directly to the mains supply via an industrial or domestic socket. With an integrated separation point, you can also replace the mains plug with another mains adapter. This way you can charge your electric car even in countries where the standard protective contact socket in Germany is not used.
However, the Universal Type 2 mobile charging station is not only suitable for traveling or in emergencies. Even at home it is a practical addition in combination with a wall mount and can replace a wall box. With a charging power of up to 11 kW, it can keep up with most wall charging stations.
The mobile electric car charging station has an integrated control and protection device in the controller box (IC-CPD), which takes over the charging control via the charging cable to the vehicle. Charging will automatically stop when the battery is fully charged.
Features:
- Charge at home and on the go at household and industrial outlets
- No need to set current or parameters
- Replaceable AC adapters
- Automatically stops charging when the battery is fully charged
- Single-hanging eye on the housing
- Ergonomic, solid plug and coupling design
- Robust housing
- safe to ride over
Technical Information: Electrical equipment designed to IEC standards for road electric vehicles, charging system for electric vehicles (IEC 61851-1)
In-Cable Control and Protection Device (IEC 62752)
Household plug (charging current 6 a/8 a/10 a), industrial plug (charging current 16 a 1/3-phase / charging current 32 a 1/3-phase)
Vehicle connector (charging current 32 a 1/3-phase)
Charging Mode Mode 2
Degree of protection IP55 (connected)/IP24 (not connected)
Transmission of charging currents of up to 32 a per phase
Total length of charging cable - 5.5 m-6.0 m (varies depending on the mains connection)
Electrical Data: Charging power 1/3-phase 1.2 kW - 22 kW
Rated voltage range 110 - 400 V.
Rated current 6 - 32 A.
Frequency 50 - 60 Hz
Residual current protection (RCD) = 30 mA AC, = 6 mA DC
Max. Charging current mains plug 6 a/8 a/10 a (country-specific)
Max. Charging current for industrial plug 16 a/32 A.
Security Features: Self-test at start-up
Fault Current Detection
CP communication to the vehicle according to IEC 61851
Monitoring of the protective conductor (not for the IT version Norway)
Monitoring of the relays
Overcurrent Detection
Over and under voltage detection
