INTELLINET INT 560993 - Switch, 16-Port, Gigabit Ethernet

Description

Save installation costs and time with PoE

• Power and data connection for up to 16 PoE network devices
• Saves time and installation costs by transferring data and power over the existing network cables
• 10 auto-sensing ports automatically detect the optimal network speed
• IEEE 802.3at/af-compliant RJ45 PoE/PoE+ outputs
• Output power up to 30 watts per port
• PoE capacity 220 Watts
• Supports IEEE 802.3at and IEEE 802.3af compliant PoE devices (wireless access points, VoIP phones, IP cameras)
• Supports IEEE 802.3at/af detection and protection against short-circuit, overload and overvoltage
• All RJ45 ports support Auto-MDIX (Auto Uplink)
• Store-and-forward architecture
• IEEE 802.3x Flow Control at full duplex
• Supports up to 8192 MAC address entries
• 256 KB buffer
• Two high-performance fans ensure perfect cooling and airflow
• 19'' mounting bracket included
• 3 Years Warranty

The Intellinet 16-Port Gigabit Ethernet PoE+ Switch (Item number 560993) is an excellent solution for transmitting data and power to PoE-compatible devices over Cat5e or Cat6 network cables. Equipped with 16 Gigabit ports (all with support for 802.3at/af PoE/PoE+), this switch provides power to access points and bridges, VoIP phones, IP cameras and much more, while simultaneously providing transmission speeds of up to 1000 Mbps.

Power over Ethernet 802.3at
This switch supports the IEEE 802.3at protocol, providing up to 30 watts of power per port. IEEE802.3af- or IEEE802.3at-compatible devices connected to the switch do not require additional power, which saves significant cost and time for routing power lines and eliminates the need for a lot of cable clutter and adapters in exposed areas such as walls and ceilings. Any combination of PoE and non-PoE devices is supported, and protection against short-circuits, overloads, and over-voltages ensures your equipment is protected. For devices that do not support the 802.3at/af standard (older access points or network cameras), we recommend using an Intellinet PoE/PoE+ splitter.

Extremely high throughput
With a 32 Gbps backplane speed, this switch provides plenty of performance for your PCs, servers, and other network devices.

Standards

• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3ab (Twisted pair Gigabit Ethernet)
• IEEE 802.3af (Power over Ethernet 802.3at Type 1)
• IEEE 802.3at (Power over Ethernet 802.3at Type 2)
• IEEE 802.3u (100Base-TX Fast Ethernet)
• IEEE 802.3x (flow control, in full duplex mode)

General

• Supported Media:

- 10Base-T Cat3, 4, 5 UTP/STP RJ-45
- 100Base-TX Cat5 UTP/STP RJ-45
- 1000Base-T Cat5e UTP/STP RJ-45
• Packet Filter/Forwarding Rate:

- 1,488,000 pps...