Description
Charging plug, type 2, 16 A, male, 3-phase
- Charging plug according to IEC 62196-2
- Manufacturer: DUOSIDA
- required for charging station
- high quality stable design
- with rubber cap (can be dismantled)
- tested by TÜV Rheinland
- contacts: 3 x L + N + PE, as well as PP + CP
- Cable cross-sections: 5 × 2.5 mm² and 2 × 0.5 mm².
- up to 16 A, 250 V AC permanent
- Contacts for crimping or soldering
- Housing can be opened via 4 Torx screws
- Plug contacts can be removed and contacted individually
- IP44, protection against foreign bodies and splash water
- Scope of delivery: Plug without 680 Ohm resistor for current coding
- Plug colour: single phase = green, 3-phase = white
Execution:
L1+L1+L3+N+PE, PP+CP
1-phase: for cables with only one phase or three phases and a diameter of up to 13.5 mm
3-phase: for cables with three phases and a diameter of up to 15.5 mm
Hint:
As the assembly of charging or adapter cables is very demanding, this should only be carried out by qualified personnel.
Consequential damage due to incorrect handling or installation will not be accepted.
