Product Description
LPC1766FBD100: 256kB Flash, 64kB SRAM, Ethernet, USB, LQFP100 packageOverview:The LPC1766 is a Cortex®-M3 microcontroller for embedded applications that features a high level of integration and low power consumption at frequencies of 100 MHz.
Features include 256 kB of flash memory, 64 kB of data memory, Ethernet MAC, USB device/host/OTG, 8-channel DMA controller, 4 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I2C, I2S, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, quadrature encoder interface, 4 general-purpose timers, general-purpose PWM with 6 outputs, ultra-low power real-time clock with separate battery supply, and up to 70 general-purpose I/O pins.
The LPC1766 is pin compatible with the 100-pin LPC2368 Arm7™ MCU.
Features:• Arm Cortex-M3 processor running at frequencies up to 100 MHz.
• Arm Cortex-M3 built-in interleaved vectorial interrupt controller (NVIC)• Up to 256 kB on-chip Flash programming memory• Up to 64 kB SRAMIn-System Programming (ISP) and In-Application Programming (IAP)• Eight channel general purpose DMA controller (GPDMA)• Ethernet MAC with RMII interface and dedicated DMA controller• USB 2.0 full-speed device/host/OTG controller • Four UARTs with fractional baud rate generation, internal FIFO and DMA support• CAN 2.
0B controller with two channels • SPI controller with synchronous, serial, full duplex communication• Two SSP controllers with FIFO and multiprotocol capability• Three extended I2C bus interfaces• I2S (Inter-IC Sound) interface • 70 general purpose I/O (GPIO) pins with configurable pull-up/down resistors• 12-bit/8-channel analog-to-digital converter (ADC) with conversion rates up to 200 kHz• 10-bit digital-to-analog converter (DAC) with dedicated conversion timer and DMA • Four general purpose timers/counters• One motor control PWM with support for three-phase motor control• Quadrature encoder interface that can monitor an external quadrature encoder• A standard PWM/timer block with external counter input• Low power RTC with separate power range and dedicated oscillator• WatchDog timer (WDT)• Arm Cortex-M3 system clock timer, including an external clock input option• Repeated interrupt timer provides programmable and repeating timed interrupts• Each peripheral has its own clock divider for further power savings• Standard JTAG test/debug interface for compatibility with existing tools• Integrated PMU (power management unit)• Four reduced power modes: hibernate, deep sleep, power down, and deep shutdown• Single 3.3 V power supply (2.4 V to 3.6 V)• Four external interrupt inputs configurable as edge/level sensitive• Non-maskable interrupt (NMI) input• Wake-up interrupt control (WIC)• Wake-up of the processor from shutdown mode via any interrupt• Brownout detection with.
.
.
