Description
Schellenberg ROLLODRIVE 55 electric belt winder
- Electric belt winder: Ideal for tenants (simple mounting on the surface)
- For roller shutters up to a maximum area of 5.0 m² (plastic)
- For narrow and wide 14 mm and 23 mm (system mini or maxi) belts and a hole spacing of 230 mm
- Includes automatic timer, automatic obstacle detection and blocking protection
- Minimum power consumption in standby and data and end position backup in the event of a power failure
With the electric belt winder for roller shutter belts (ROLLODRIVE) you have uncomplicated and easy to install helpers at hand: The belt winder drives roller shutters up and down at the push of a button or automatically. The belt belts of the roller shutters do not have to be operated by hand at the most intensive time! The winding and unwrapping of the belt belts, with the help of which the roller shutters are opened and closed, are carried out by electric roller shutters belt winder for you.
With the Schellenberg roller shutter ROLLODRIVE 55 belt winder, you can open and close roller shutters automatically or conveniently at the touch of a button. The roller shutter is lowered or lowered with a conventional belt. However, the belt is electrically driven by the ROLLODRIVE 55. With this form of the Schellenberg roller shutter control, you no longer have to pull the belt by hand.
The drive of the electric belt winder ROLLODRIVE 55 from Schellenberg can raise and lower roller shutters with an area of max. 5.0 m². This information applies to plastic roller shutters and may be lower depending on the material, type and severity of the roller shutter. The weight of the roller shutter is decisive when it has been completely shut down. This weight should not exceed 30.0 kg (maximum initial draft load: 30.0 kg).
The Schellenberg roller shutter belt winder ROLLODRIVE 55 works quietly, smoothly and fits into any living environment thanks to its compact design. Due to the simple installation and removal (surface mounting), the electric belt winder is always interchangeable and moves with it to the new apartment. This roller shutter drive is therefore also ideally suited for tenants, as the roller shutter box does not have to be opened during assembly.
Schellenberg's ROLLODRIVE 55 is suitable for narrow and wide belt belts with a width of 14 mm and 23 mm. An adapter for belt belts with a width of 14 mm is included. The hole spacing for fixing is 230 mm.
Package Contents- Electric belt winder
- Mains cable (cable: 1.5 m with mains plug)
- Adapter Belt Infeed Mini
- Adapter Belt Infeed Maxi
- Reducing adapter winding roller for Mini
- Belt Shaft Cover
- Mains Cable Clamp
- Screw for clamping
- Set Of Fastening Material
- Installation Instructions
